setting up your Home surround-speakers

Hints on Speaker Placement

Placing Surround home speakers in the right place for best sound.

Where you put your speakers in the room has a big effect on the quality of the sound. The following guidelines should help you to get the best sound from your system.

  • The subwoofer can be placed on the floor. Ideally, the other speakers should be at about ear-level when you are listening to them. Putting the speakers on the floor (except the subwoofer) or mounting them very high on a wall is not recommended.
  • For best stereo effect, place the front speakers 2 meters to 3 meters (6 ft. to 9 ft.) apart, at equal distance from the TV.
  • If you are going to place speakers around your television use shielded speakers or place the speakers at a sufficient distance from your television.
  • If you are using a center speaker, place the front speaker at a wider angle. If not, place them at a narrower angle.
  • Place the center speaker above or below the television so that the sound of the center channel is localized at the television screen. Also, make sure the center speaker does not cross the line formed by the leading edge of the front left and right speakers.
  • It is best to angle speakers towards the listening position. The angel depends on the size of the room. Use less of an angle for bigger rooms.
  • Surround and surround back speakers should be positioned 60 cm to 90 cm (2 ft. to 3 ft) higher than your ears and titled slight downward. Make sure the speakers do not face each other. For DVD-Audio, the speakers should be more directly behind the listener than for home theater playback.
  • Try not to place the surround speakers farther away from the listening position than the front and center speakers. Doing so can weaken the surround sound effect.
  • Place the left and right front height speakers at least one meter directly above the left and right front speakers.
setting up your Home surround-speakers
Setting up your Home surround speakers

 

Precautions:

Make sure that all speakers are securely installed. This not only improve the sound quality, but also reduces the risk of damage or injury resulting from spoeakers being knocked over or falling in the event of external shocks such as earthquakes.

Similar Posts

  • Safety Precautions when using a Pressure Cooker

    The following are Important Safeguards / Precautions that are recommended by most appliance manufacturers.  Important Safeguards (Safety First (1st):   To reduce the risk of personal injury or property damage, basic safety precautions should always be followed, including the following:  Always check the exhaust pipe before use. Hold cover up to light and look through…

  • How to Connect a Condenser to a Midrange or Tweeter Speaker?

    Basic understanding of the use of a Condenser to devices such as a Midrange Speaker or Tweeter. Connecting a condenser to a midrange or tweeter speaker is a simple process, however, it requires a few extra steps to ensure a quality sound connection. If you purchase a Crossover Network for your Woofer/ Midrange/ Tweeter system you do not…

  • Precautions needed when using a DVD player

    Precautions for using a DVD player at home are as follows below. Follow these simple instructions and your DVD player should be able to last you a very long time. Place of installation: ·         Choose a stable place near the television or stereo system being used with the player. Do not place the DVD player on…

  • Delivery Available

    Name and Contact Number of the person(s) receiving the item(s). Full address, should include a house or store number, and/or light pole number. List any landmark(s) (eg. Police Station, Church, Bridge, Community center, etc). Any landmark you think will help our driver find your location easily. A Google Map location where you will like us…

  • Car Audio Amplifier Function/ Installation Guide

    Speaker connection – Never connect cables with the chassis ground. This may destroy your amplifier. Check that your speakers are connected correctly which means plus (+) to plus (+) and minus (-) to minus (-). Recommended speaker cable from 2.25mm to up.  BATT+ – Battery + terminal. The +12 Volt power cable must be connected with a…