Wireless Remote Door Chime Bell

Wireless Remote Door Bell Chime

This Wireless Remote Door Chime / Wireless Door Bell is easy to install, with NO wiring nor AC power required.

Pleasant “Dingdong” Sound

Can be used as a Door Bell or an Alert

Low Power Consumption. Powered by AA batteries. 

Batteries Installation & Replacement:

• Press down the battery compartment cover on the remote Sender and press back at the same time.
• Install a 9V battery (not included) into the compartment of the remote Sender. Open the battery compartment cover on the receiver with the same method and install 2 AA batteries (not included). 
• If the chimer’s sound becomes weak or the “LED” indicator light on the remote sender is dim the batteries need replacement. 

Operation:

• Press the remote Sender’s button. The chimer will sound. This will confirm it is ready for use. 
• The longest working distance is up to 30 meters or 90 feet. 

Note:

• The installation location should avoid exposure to sunlight and rain. 
• There are 10 channels such as A, B, C …. in the product; do not use the same channel within 30 meters of another receiver to avoid interference. 
• Observe polarity symbols “+” and “-” marked inside the battery compartment.