About 2 Ohms Car Amplifiers

Car amplifiers that are designed to operate efficiently at loads down to 2
Ohms. This means that you can install four 8 Ohm speakers per channel when using
parallel wiring.

Increasing the number of woofers per channel at low frequencies (below 100Hz) produces
an acoustic coupling effect. This acoustic coupling effect increases your power output
by about 3dB per speaker, or the equivalent of an additional 10W per speaker.

When operating at 2 Ohms, the amplifiers will increase their output power by approximately
50%. The current draw will also increase by about the same amount, so be sure you have
enough current to run the amplifiers into a 2 Ohm load.

If you lack adequate current, your music reproduction will be distorted.