Energy saving tips for Refrigerator

Energy saving tips for Refrigerator

The appliance should be located in the coolest area of the room, away from heat producing appliances or heating ducts, and out of the direct sunlight.

Let HOT foods cool to room temperature before placing in the appliance. Overloading the appliance forces the compressor to run longer. Foods that freeze too slowly may lose quality or spoil. 

Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance. This cuts down on frost build-up inside the appliance. 

Appliance storage bin should not be lined with aluminum foil, wax paper or paper toweling. Liners inter

Similar Posts

  • Important Need to Know About Coin Button Cell Batteries

    Important need to know about coin button cell batteries: Keep away from children! Button coin cell batteries are a Choking hazard, if swallowed, they will cause child suffocation and other parts of the body to be injured. So please do not play with your child’s life. In case of an accident, please go to the…

  • Maintenance of your Refrigerator

    Stainless Steel Refrigerators:  Proper maintenance depends on the type of finish unit. Stainless Steel Refrigerators that do not leave fingerprint marks have a Polyester clear coat. Refrigerators or any units with a polyester clear coat should not be cleaned with stainless steel polishes since they will damage the protective clear coat on the item.  Important…

  • Delivery Available

    Name and Contact Number of the person(s) receiving the item(s). Full address, should include a house or store number, and/or light pole number. List any landmark(s) (eg. Police Station, Church, Bridge, Community center, etc). Any landmark you think will help our driver find your location easily. A Google Map location where you will like us…

  • Car Audio Amplifier Function/ Installation Guide

    Speaker connection – Never connect cables with the chassis ground. This may destroy your amplifier. Check that your speakers are connected correctly which means plus (+) to plus (+) and minus (-) to minus (-). Recommended speaker cable from 2.25mm to up.  BATT+ – Battery + terminal. The +12 Volt power cable must be connected with a…